flow of metal meaning in Chinese
金属流变
金属流动
Examples
- In this article , the reason how the friction produces in the process of metal forming was analyzed , and the friction was thought to be mainly caused by the plastic flow of metal in the pits of tool surface
本文从微观入手对金属压力成型过程中摩擦的形成原因进行了分析，认为摩擦主要是由于被压入工具表面凹坑金属的塑性流动所引起的。 - In this article , the reason how the friction produces in the process of metal forming was analyzed , and the friction was thought to be mainly caused by the plastic flow of metal in the pits of tool surface
摘要本文从微观入手对金属压力成型过程中摩擦的形成原因进行了分析，认为摩擦主要是由于被压入工具表面凹坑金属的塑性流动所引起的。 - In different in terne die travel , the metal flow characterize in warm extrusion forming processes and the affection for the flow of metal stage which made by the difference between the blank bottom altitude and the axial direction limiting size in warm extrusion forming technique have been analysed we have gotten the equivalent strain field and the velocity field and other field variable that the blank in different in terne die travel and the die travel - load curve . . at the same time , we have analyzed the contributing factor for the oil pump stator forming process optimized and achieve thereasonable die parameter for the war m extrusion forming finally , the optimized technics parameters were used into pilot production , then the qualified oil pump stator forging were produced , the analog results were compared with those of pilot production
论文具体分析研究了不同成形工艺过程中金属流动的特点，并对不同凸模行程下温挤成形过程中的金属流动特点、坯料连皮厚度(底部高度)与温挤压成形工艺中的轴向界限尺寸的差值对金属变形阶段的影响进行了分析，获得了坯料在不同凸模行程下的等效应变场、速度场等场变量及凸模行程-载荷曲线，同时对油泵定子成形过程的影响因素等进行了分析，优化并获得了合理的温挤成形工艺及模具参数。最后，利用模拟优化获得的各项工艺参数进行生产实验，得到实际生产出的合格油泵定子件，并将模拟结果与生产实验结果进行比较。